Tag Archives: Building

toy cars

Building, Tuning, and Maintaining Different Gear Credentials

The gear differentials require little maintenance because they are durable. This explains the reason as to why they have become the norm as far the entry level cars are concerned. Their ability and consistency to be tuned with different oils are what makes them stand out for any condition of the track. Building a gear correctly is easy as well as the routine changing of the grease and fluids. These are some of the ways that ensure that working of the diff is in the manner that is required. The rc nitro cars for sale are in high demand. This blog addresses the building, tuning, and maintenance of the different gear credentials.

Basic facts

What the differential does

The differential is a somewhat complicated mechanism that is intended to do a simple task. bnvxxzqwklmlpyThis is by allowing the opposing wheels to spin at the different rates. This can be best understood by thinking of a car that is negotiating a corner; the inside wheels usually cover a shorter distance as compared to the outside wheels. If the vehicle did have the differential, then the inside tires would spin excessively, therefore, causing your car to break loose or push through the corner and spin out. Since none of the consequences is ideal, the differentials are usually used to help the vehicles make the corners smoothly.


When you are building a gear differential, it is important to ensure that everything is fresh and clean as possible. There is no need to purchase the outdrive or the new gears every time you are rebuilding your differential. However, in some circumstances the new paper gaskets and the O-rings are usually a great idea especially if the differential is leaking.

Cleaning the Differential

Cleaning the Differential involves four major stages. The first one is cleaning the differential before taking it apart and then disassembling the differential pieces, piece by piece and cleaning each item individually. Secondly, is checking the bearing by rolling the bearing with your fingers to ensure that they freely spin. If they are not, you can blast them clean with motor spray and then re-lube them with a drop of the bearing oil. Last but not least is inspecting for the wear. The outdrives usually wear at a fast rate, if they have worn out, you should consider replacing them.


dune buggyThere are also certain steps that should be taken when assembling the gear credentials. The first step is greasing the o-rings. Secondly, is shimming off the gears properly. Thirdly, is adding the fluids and the grease, while lastly is the tightening of the screws.…